Programmable Sweep Instruction Manual
CONFIGURATION
telemark.com
44 of 58
Rev 1.0.0
5.8.8 Programmable Shape
If the
Prog Shape
button says “No Shape Selected” p
ress the
Select Prog Shape
button
to select a shape from the “Select Prog Shape” list.
Figure 5-22, Select Shape
“?” next to the shape number means that the shape is not def
ined and not selectable.
Once a shape is selected and there is a number in the
Prog Shape
button then the
Prog Shape
button can be pressed.
Figure 5-23, Setup Pattern
Freq
–
Frequency, 0.1Hz to 80Hz
Rotation
–
Rotation speed of the complete pattern, positive values for CCW rotation, -
20 to 20Hz.
Phase
–
Controls the angle of the line (only visible when the rotation is 0), -359 degrees
to 359 degrees
Amp
–
Amplitude, 25-100% of configured maximum pocket
LDC Tail
–
Display of the history of the pattern, 10 to 1000
Profile
- -10.0 to 10.0
5.9 Making Programmable Shapes
To make a programmable shape press
Prog Shape Edit.
Select a shape to edit
Prog
Shape Select