Digital Sweep Instruction Manual
USING THE DIGITAL SWEEP
telemark.com
26 of 48
Rev 1.0.0
4 USING THE DIGITAL SWEEP
4.1 Front Panel
Please refer to Fig. 4-1 for front panel details
Figure 4-1 - Front Panel
A
–
POWER SWITCH
(see chapter 4.1.1 for details)
B -
Power On LED
indicator (see chapter 4.1.2 for details)
C -
HANDHELD
(see chapter 4.1.3 for details)
D -
LCD touch screen
(see chapter 4.1.4 for details)
E -
LED, RUN
(see chapter 4.1.5 for details)
F -
LED, REMOTE CONTROL
(see chapter 4.1.6 for details)
G -
LED, HANDHELD
(see chapter 4.1.7 for details)
4.1.1 Main Power Switch
Switching On the power button (position 'I') activates the main power circuit of the
device. Switching off the unit (position 'O' switch) completely cuts the power to the
internal circuits - controller is safe to make rear panel connections.
