Telekom T-Octophon F30 IP Operating Instructions Manual Download Page 87

Page: 87 / 113

Team and Executive/Secretary Functions With Trunk Keys

Step by Step

Select and confirm.

Enter the code.

Enter the destination number.

Confirm.

If available. Press the "Forward Line" key. (You have stored the call for-

warding type and destination on the "Forward Line" key

page 51.)

Deactivating call forwarding:

Press the key. The LED lights up.

Select and confirm.

ride

Enter the code.

Press the trunk key you wish to use.

Enter the number of the trunk key you wish to use.

If available. Press the "Forward Line" key.

Meaning of LED Indications on the "Forward Line" Keys:

The LED on the "Forward Line" key is off - call forwarding is not active

for this trunk.

LED on the "Forward Line" key is lit - call forwarding is active for this

trunk.

LED on the "Forward Line" key is flashing slowly - the trunk is a call

forwarding destination.

1=all calls?

2=external calls only?

3=internal calls only?

Save?

Program/Service

#501=Forward Line: Off?

If you have activated call forwarding for a trunk, a special dial

tone sounds when the line is seized.

Summary of Contents for T-Octophon F30 IP


















































































































Search results

Summary of Contents for T-Octophon F30 IP

Reviews:

Related manuals for T-Octophon F30 IP

Brands by name

Popular brands

Telekom T-Octophon F30 IP, Operating Instructions Manual

Search results

Summary of Contents for T-Octophon F30 IP

Reviews:

Related manuals for T-Octophon F30 IP

Brands by name

Popular brands