Displaying and Assigning Call Charges
57
Step by Step
Displaying and Assigning Call
Charges
Displaying Call Charges (Not for U.S.)
For the current call:
The display usually shows call charges at the end of a call (default set-
ting).
If you wish to display charges continuously during a call in progress,
your service personnel must request this feature from your carrier.
Indication of the cost of a telephone call has to be requested from the
service provider and has to be installed by an authorised technician.
Depending on the setting, during or after the call, the display will
show the cost of the telephone call.
Some carriers also let you display toll-free external calls. The mes-
sage "Free of Charge" appears on the screen either before or during
the call.
If the cost indication facility has not been installed, the display will
show the dialled number and/or the length of the telephone call.
For all calls and the last one conducted:
The connection charges for the last chargeable call conducted are
displayed first. Five seconds later, the total accumulated connection
charges appear.
Press the key. The LED lights up.
>
:
Select and confirm.
or
qji
Enter the code.
If a call is transferred, the charges are assigned to the tele-
phone to which the call was transferred.
Program/Service
*
65=Show call charges?
