![background image](http://html.mh-extra.com/html/telegate/v-drive/v-drive_user-manual_1081838004.webp)
How to Install
1. Check if main parts are included in the package (long & short cable, V-drive).
2. Connect the given cable to USB port of your Desktop or Notebook PC.
3. Connect the V-Drive.
4. Message of ‘Looking for new hardware..’ shows on the screen.
5. Insert installation diskette into floppy disc drive.
6. Choose ‘Select from device list’ and click ‘Next’ button.
7. Choose ‘Floppy Disc Drive’ and click ‘Next’ button.
8. Wait a few seconds to complete the first installation,
and to see the same message of no. 6
9. Repeat the procedures of no. 6 and no. 7.
10. After a couple of seconds, message of ‘driver sucessfully installed’ will come out.
FCC Compliance Statement
Caution : Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance wi th the instructions, may cause harmful
interference to radio communications. However, there is no guara ntee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to t ry to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different fro m that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.