Telegärtner DoorLine TM4, Operating And Assembly Instructions Manual

Page: 20 / 52

5
Configuration
20 / 52 DoorLine TM4
Notes
▪ Write down the corresponding codes for your own reference before you
start the configuration.
▪ When the discussion duration elapses (factory setting 1 minute), the con-
nection is disconnected automatically even during programming.
▪ If the programming is rejected by the device (negative acknowledgement
tone), you will have to repeat the incorrect programming step.
▪ If you entered the wrong PIN three times in succession, the connection is dis-
connected.
1 Pick up the receiver
2 Call the device
You will hear the positive acknowledgement tone
3 Actuate the hashtag button twice on the telephone
You will hear the neutral acknowledgement tone
4 Enter the PIN
You will hear the positive acknowledgement and are now
in programming mode
If you hear the positive acknowledgement tone, you can start with the pro-
gramming. Otherwise the procedure must be repeated.
If you are in programming mode, you can carry out all configuration options
one after the other.
5.7 Automatic adjustment to the PBX system
To guarantee optimum hands-free talking in all PBX systems, your device can
adjust automatically to the respective system.
The adjustment takes around 3 seconds. An adjustment tone sounds during this
procedure. During this period, you should not talk into the receiver because this
can interfere with the automatic adjustment.