Telegärtner DoorLine Slim DECT, Operating And Assembly Instructions Manual

Page: 44 / 56

7
Overview of programming table
44 / 56 DoorLine Slim DECT
7 Overview of programming table
The following table contains an overview of all programming commands. In or-
der to use the programming commands, registration by means of the PIN Code
in configuration mode is required (see chapter Entry to configuration mode
[
} 25]).
Programming command Own settings Description
##<PIN Code> Entry to the configuration.
Factory setting of PIN Code:
0000
# à 01 <SwitchBox> SwitchBox:
0=no SwitchBox
1=use SwitchBox
# à 02 <PIN old>#<PIN
new>#<PIN new>#
Change PIN Code for Switch-
Box
#
à
04 <Door opener func-
tion>
Door opener function:
0=disabled
1=enabled
Factory setting: disabled
# à 05 <Door opener time> Switching time for door
opener:
1 to 9 seconds or 0 (door
opening not possible)
Factory setting: 3 seconds
# à 07 <Call duration> Defining maximum call dura-
tion:
1 -9 minutes or
0=without limitation
Factory setting: 1 minute
# à 08 <Call duration> Call duration to extension line:
01-99 seconds (double-digit
entry)
Factory setting: 30 seconds
# à 11 <Call number> Call number to be called
from bell pushbutton 1
# à 12 <Call number> Alternative number to be
called from bell pushbutton 1