8
Everyday use
96 / 112
DoorLine Pro EXCLUSIVE
8.4
Using access control
You can use the door intercom system for keyless door opening by means of a
number code.
The access control must be set up beforehand in the Configuration menu and
a relay contact must be defined as door opener.
The door intercom system shows the "Bell pushbuttons" default view.
1. Swipe from the right edge of the display to the left edge.
ð
An input keypad then appears (see chapter Use of the display keypad
[
27]).
2. Enter the PIN that you assigned in the configuration for the access control.
ð
If the PIN is not available, you can exit PIN input by swiping over the dis-
play in reverse direction.
3. Press "
↲
" to confirm your input.
