Telegärtner DoorLine Pro EXCLUSIVE Series Operating And Assembly Instructions Manual Download Page 55

Page: 55 / 112

Configuration via the PC software

DoorLine Pro EXCLUSIVE

55 / 112

Configuration via the PC software

6.1

Installing PC software

1. Under http://www.doorlinepro.de/de/support/fuer-doorline-pro/doorline-

pro-handbuecher-downloads.html, download the current version of the
software and save the file on your PC under the name
<<dp100setup.exe>>.

2. Start the installation procedure by double-clicking on the file

<<dp100setup.exe>>.

The following warning message is issued:

3. Confirm the message with "Yes".

4. Now follow the instructions of the installation software.

5. Select the language and press "Next" to confirm.

Summary of Contents for DoorLine Pro EXCLUSIVE Series

















































































































Search results

Summary of Contents for DoorLine Pro EXCLUSIVE Series

Reviews:

Related manuals for DoorLine Pro EXCLUSIVE Series

Brands by name

Popular brands

Telegärtner DoorLine Pro EXCLUSIVE Series, Operating And Assembly Instructions Manual

Search results

Summary of Contents for DoorLine Pro EXCLUSIVE Series

Reviews:

Related manuals for DoorLine Pro EXCLUSIVE Series

Brands by name

Popular brands