manualshive.com logo in svg

Telegärtner DoorLine Pro EXCLUSIVE Series, Operating And Assembly Instructions Manual

Share
Download
Telegärtner DoorLine Pro EXCLUSIVE Series Operating And Assembly Instructions Manual Download Page 112

Technical Hotline

If you have questions on the operation or configuration of your DoorLine that
cannot be answered in these Operating Instructions, please contact your spe-
cialist dealer.

If your specialist dealer cannot help, our Hotline is at your disposal.

Usage of the Hotline incurs the normal connection costs.

Telegärtner Elektronik Hotline

Tel.:
Monday-Thursday:
Friday:
[email protected]

+49 7951 488 9200 
7:00 a.m. - 4:30 p.m.
7:00 a.m. - 1:00 p.m.

Issued by / Manufacturer:

Telegärtner Elektronik GmbH
Hofäckerstraße 18
D-74564 Crailsheim
+49 7951 4880

www.telegaertner-elektronik.de 
[email protected]

Version:

4.1 / 2019/11/19
EN-Translation of the Original Operating
and Assembly Instructions
Item No.: 115292

Summary of Contents for DoorLine Pro EXCLUSIVE Series

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands