Everyday use
8
DoorLine Pro EXCLUSIVE
103 / 112
8.7
Direct commands during voice
communication
During a door call, you have the following additional input options on your tele-
phone:
Disconnects the connection immediately. Door intercom system
moves to standby.
Switch command for relay contact 1.
Switch command for relay contact 2.
Switch command for SwitchBox contact 1.
Switch command for SwitchBox contact 2.
Switch command for SwitchBox contact 3.
Switch command for I/O Box contact 1.
Switch command for I/O Box contact 2.
Switch command for I/O Box contact 3.
Activates the door opener.
Function is only available if
▪ a relay contact is configured as door opener and
– the door call was set up by the door intercom system
or
– the door opener function was enabled in the configuration
of the door intercom system.
Important:
The contacts can only be switched via these direct commands if
they have been assigned the function "Redial" in the configuration.
