WI-FI CONNECTION
22
19. WI-FI CONNECTION
Wi-Fi provides wireless internet access over distances of up to 100 meters. To use your phone’s
Wi-Fi, you need access to a wireless access point or “hot spot.”
The availability and range of the Wi-Fi signal depend on a number of factors, including obstructions
and interference from other sources of radio frequency signals.
To connect to a Wi-Fi network, follow the steps below:
1. Go to
MENU
>
Settings
>
Network & Connectivity
>
Wi-Fi
.
2. Select
On
to turn Wi-Fi on. When Wi-Fi is enabled, you will see the names and security settings
of in-range Wi-Fi networks in
Available Networks
.
3. Choose
Available Networks
, select a Wi-Fi network to connect, enter the password (if it’s not an
open network), and then press the
right soft key
to connect. Once your phone is connected
to the Wi-Fi network, you will see in the status bar.
To quickly turn Wi-Fi on or off, select from quick settings
.
Notes
:
-
The next time your phone connects to a previously accessed secured Wi-Fi network, you will
not be prompted to enter the password again, unless you reset your phone to its factory default
settings or you instruct your phone to forget the network.
-
The password for a household wireless LAN router may be printed on a label on the router (WEP,
WPA, KEY, etc.). Contact the router manufacturer or consult the router user manual if you cannot
find the password. For the password for a public wireless LAN, check with the service provider.
-
To reduce the risk of leaking personal data from a mobile device, do not connect to untrusted Wi-Fi
networks. Only well-known or trusted ones should be used. Do not access personal or sensitive
data with public Wi-Fi networks.
20. CLOCK
Setting an alarm
You can set multiple alarms using your phone’s
Clock
app.
To set an alarm, follow the steps below:
1. Go to
MENU
>
Clock
>
Alarm
, or press the up navigation key from the home screen and select
Clock
>
Alarm
.
2. Press the
left soft key
to create a new alarm.
3.
Set the alarm options, including time, repeat pattern, alarm tone (sound), and alarm name.
4. Press the
right soft key
to save and turn on the alarm.
Note
: The alarm will not work if your phone is off.
Turning an alarm on or off
After you set an alarm, it is automatically turned on and appears in the status bar. To turn an
existing alarm on or off, highlight it using the up or down navigation key and then press
OK
.
Tip
: If the alarm is set to repeat, this turns all repeats on or off.
Snoozing or stopping an alarm
At the set alarm time, your phone sounds the alarm and/or vibrates.
When the alarm sounds or vibrates, press the
left soft key
to snooze it or the
right soft key
to stop it.
Tip
: To view or change the snooze time for all alarms, go to
MENU
>
Clock
>
Alarm
>
Options
>
Settings
>
Snooze
.
