2
2
Network Connection
Connect IP-Cam via LAN or WAN. Here only take IE browser for example. The details are as
follows:
2.1
LAN
Access through IP-Tool
Network connection:
①
Make sure the PC and IP-Cam are connected to the LAN. Download the MP IP Search
Tool from
www.TeleEye.com
and then install it in the computer.
②
Double click the IP-Tool icon on the desktop to run this software as shown below:
③
Modify the IP address. The default IP address setting is DHCP. It will obtain IP address
automatically from your DHCP server. Click the information of the camera listed in the above
table to show the network information on the right hand. Modify the IP address and gateway
of the camera and make sure its network address is in the same local network segment as that
of the computer. Please modify the IP address of your device according to the practical
situation.
