
May
2015
WorkHorse H-ADCP Operation Manual
Page 168
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Timing Commands
The following commands let you set the timing of various profiling functions.
Available Timing Commands
This section lists the available Timing commands.
>t?
TB = 00:00:00.00 --------- Time per Burst (hrs:min:sec.sec/100)
TC = 00000 --------------- Ensembles Per Burst (0-65535)
TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP = 00:00.05 ------------ Time per Ping (min:sec.sec/100)
TS = 07/08/20,11:20:36 --- Time Set (yr/mon/day,hour:min:sec)
TT = 2007/08/20,11:20:36 - Time Set (CCYY/MM/DD,hh:mm:ss)
>
Timing Command Descriptions
TB - Time per Burst
Purpose
Sets the interval between “bursts” of pings.
Format
TB hh:mm:ss.ff
Range
hh
= 00 to 23 hours
mm = 00 to 59 minutes
ss
= 00 to 59 seconds
ff
= 00 to 59 hundredths of seconds
Recommended Setting.
Special applications only.
Description
The TB and TC commands work together to allow the H-ADCP to sample in a “burst
mode.” In some applications, it is desirable for the H-ADCP to ping for a short period of
time at a high ping rate (“burst”), wait for a set period of time, and then repeat the pro-
cess. You also must set the time per ensemble, time between pings, and number of pings
per ensemble.
Example
Deployment timing example:
TB 01:00:00.00 (time per burst)
TC 20 (ensembles per burst)
TE 00:00:01.00 (time per ensemble)
TP 00:00.20 (time between pings)
WP 2 (pings per ensemble)
The H-ADCP will average two pings (WP-command) 0.2 seconds apart (TP-command). It then sends the
ensemble to the recorder or through the I/O cable. This process is repeated once a second (TE-command)
for a total of twenty ensembles (TC-command). After the 20th ensemble is processed, the H-ADCP sleeps
for one hour (TB-command) from the time of the first ping of the first ensemble until the second burst
begins.