Teledyne UI, User Manual

Page: 62 / 128

48

Operation SeaBat Sonar UI - User Manual
Refer to Appendix ‘Raw Data Recording’ on page 93 for a full description
of how to setup RDR properly for different schemes.
4.8.1.2 Record Selection
Figure 4-53 Record selection
Next to the standard data records additional data records can be
recorded.
Standard data records are always included in the recording:

7000
– Ping settings

7004
– Beam geometry

7006
– Bathymetry (legacy)

7011
– Compressed image data

7017
– Bathymetry (for UI display)

7027
– Bathymetry (RAW)

7503
– Sonar settings
Operator selectable records are: (Select the associated check boxes.)
Snippets :

7028
– Snippets data
Side scan :

7007
– Backscatter data
Sensor data (motion, position, heading, etc.):

1003
– Position

1012
– Attitude (Roll, Pitch and Heave)

1013
– Heading

7610
– Sound Velocity
Watercolumn (includes sensor data):

7018
– Full Magnitude & Phase data
Compressed water column:

7042
– Compressed water column data
Troubleshooting (includes water column data):

7021
– BITE data
Other :

All other available records.
When the checkbox is ticked the record numbers will be
displayed at the bottom of the pane in the info box.