90
Appendix Dual head (Master
– Slave)
SeaBat Sonar UI - User Manual
Step
Action
box.
When double clicked at a head indication then the corresponding
wedge becomes hidden. Double click again at the same head indication
to have it displayed again.
Both master and slave snippets data (when available) will be displayed
as well in the master snippets screen.
4
It is possible to display and access the Slave Sonar from the
Master.
Select from the Sonar address in the SUI toolbar the slave IP
address.
It is indicated in the top bar of the display, which sonar is
displayed at the screen.
5
Repeat Step 4 and select the Master IP address. This is the
major display as the Master controls the Slave.
6.3 Control
As the Master dictates when the slave sonar will cycle, most functions in
the Slave Sonar are mirrored from the master, and therefore not possible
to change in the Slave.
The following table summarizes the enabled functions when a dual head
system is used. An enabled function means the operator is able to
change the setting.
Enabled=
Disabled=X