Genie_TS_Series GigE Vision Camera
Operational Reference
81
Advanced Processing Control Feature Descriptions
The following table describes these features along with their view attribute and device framework version. For each feature the device version
may differ for each camera sensor available and whether the camera is programmed with Standard firmware (STD), JPEG firmware (JPG), or
Fast firmware (FST). Such differences will be clearly indicated for any applicable feature.
When a Device Version number is indicated, this represents the camera software functional group, not a firmware revision number. As Genie
TS capabilities evolve the device version will increase, therefore identifying the supported function package. New features for a major device
version release will be indicated by
green text
for easy identification.
The first column indicates whether a feature applies to monochrome or color camera models via a symbol. No symbol indicates a common
feature. Additionally the description column will indicate which feature is a member of the DALSA Features Naming Convention (indicated by
DFNC), versus the GenICam Standard Features Naming Convention (SFNC not shown).
B/W
Color
Display Name
Feature & Values
Description
Vouvray
DALSA
CMOSIS
CMV xx
AnaFocus
Lince 5M
flatfieldCorrectionMode
Sets the mode for the Flat Field correction.
< Beginner, DFNC >
All Designs
V1.11 – STD
V1.20 - JPG
—
Off
Off Flat Field Correction is disabled.
Active
Active Flat Field Correction is enabled.
Calibration
Calibration When this mode is selected, the camera is
configured for flat field correction calibration. The
device may automatically adjust some of its features
when calibrate mode is enabled. The features that
are automatically adjusted are device specific. The
device will not restore these features when the Flat
Field Correction Mode feature is changed from
Calibrate mode to another mode.
Flat Field Correction Current Active
Set
flatfieldCorrectionCurrentActiveSet Specifies
the current set of Flat Field coefficients to
use. User data is uploaded via the file access
feature.
< Beginner, DFNC >
all
V1.11 – STD
V1.20 - JPG
—
Factory Flatfield
FactoryFlatfield Sets the factory Flat Field coefficient table as the
current Flat Field.
User Flatfield 1
UserFlatfield1 Sets User Flat Field 1 coefficient table as the current
Flat Field.
User Flatfield 2
UserFlatfield2 Sets User Flat Field 2 coefficient table as the current
Flat Field.
User Flatfield 3
UserFlatfield3 Sets User Flat Field 3 coefficient table as the current
Flat Field.
User Flatfield 4
UserFlatfield4 Sets User Flat Field 4 coefficient table as the current
Flat Field.
