TIENet
®
Model 350 Area Velocity Sensor
Section 3 Setup and Programming for the Signature
3-3
Figure 3-2 Menu Tree: 350 Configuration
Configure Measurements
Smart Sensor Setup (TIENet)
•
Perform Scan
•
Configure Measurements
350 Level
350 Velocity
350 Temperature
Select Operation
1.
Hardware Setup
2. Configure
3. Administration
4. Home
Area Velocity Sensor
350 Velocity Signal
350 Velocity Spectrum
350 Vel Spectrum Ratio
350 Sense Voltage
Configure Measurements
Smart Sensor Configuration
The sensors are being
configured. Please wait...
Smart Sensor Setup (TIENet)
The sensors have been configured.
XXX Parameter
XXX Parameter
XXX Parameter
1 - XXX
Hardware Setup
1. Smart Sensor Setup (TIENet)
2. SDI-12 Setup
3. MODBUS Input Setup
4. MODBUS Output Setup
5. Modem Setup
Press Enter for a list of
sensors. Scroll to the 350
and press Enter to select
Scroll with arrow keys to
highlight / select / deselect
any displayed parameter
or edit its name.
Press NEXT to confirm
configuration. There may
be a slight delay.
With initial connection, begin
by performing a hardware
scan to add the 350.
Summary of Contents for TIENet 350
Page 2: ......
Page 4: ......
Page 43: ...TIENet Model 350 Area Velocity Sensor Appendix B Velocity Error Codes B 4...
Page 45: ...Warranty...
