Teledyne TDMC+, Manual, Page: 13 / 15

TDMC+ Teledyne Dual Mode Charger
Questions? Write to: support@teledynebattery.com Page 13/15
Or call: 1 (800) 456 0070 / 1 (909) 793 3131.
Charging Specifications
General Parameters 12V Specification 24V Specification
Maximum Charging Current 6A +/- .5A
Standby battery Drain <100 uA with AC disconnected
Voltage Regulation +/- .5%
Output noise and ripple <150mV, 100MHz BW
Efficiency Minimum 85% under worst line/load conditions
3 Stage Parameters 12V Specification 24V Specification
Max Absorption Voltage 14.4V +/- 100mV 28.8V +/- 100mV
Absorption to Float Current 500mA +/1 100mA 500mA +/1 100mA
Float Voltage 13.15V +/- 100mV 26.30V +/- 100mV
Overvoltage Protection 15.2V +/- 200mV 30.4 +/- 200mV
2 Stage Parameters 12V Specification 24V Specification
Duration of Stage 1 + 2 10 – 80 hours, selectable
Max Absorption Voltage 15.0V +/- 100mV 30.0V +/- 100mV
Unit Specifications
Electrical Input Voltage 85 VAC – 270 VAC, 50/60 Hz
Max Power 250 Watts
Configuration Line, neutral, chassis ground
Connector IEC 60320 C14 power inlet (C13 cord plug)
Supplied Cable 18AWG grounded cord with NEMA 5-15
grounded Type B wall connector
Electrical Output Voltage 32 VDC maximum
Current 6A maximum
Configuration Positive, Negative
Connector Two pin circular
Supplied Cable 14 AWG battery cord with crocodile style
battery clips
Environment Orientation May be used horizontally or vertically
Location For indoor use only.
Operation -22F to 140F (-30C to 60C)
Storage -40F to 176F (-40C to 90C)
Certification UL (U.S) Under Evaluation
CUL (Canada) Under Evaluation
CE Under Evaluation
FCC Compliant to Part 15 of FCC Rules
Mechanical Dimensions
(unit only)
Height 11.5” (290mm)
Depth 5” (130mm)
Width 6” (150mm)
Weight 6 lbs (2.7 Kg)