Teledyne T300, Operation Manual, Page: 258 / 426

Troubleshooting and Service Teledyne API – Model T300/T300M CO Analyzer
256
Suppresses the
warning messages.
Press CLR to clear the current
message.
If more than one warning is
active, the next message will take
its place.
Once the last warning has
been cleared, the
RANGE
function will be displayed in
the analyzer’s main
MESSAGE FIELD.
NOTE:
If a warning message persists after
several attempts to clear it, the message
may indicate a real problem and not an
artifact of the warm-up period.
SAMPLE SYSTEM RESET
TEST CAL MSG CLR SETUP
SAMPLE SYSTEM RESET
TEST CAL MSG CLR SETUP
SAMPLE SYSTEM RESET
TEST CAL MSG CLR SETUP
SYSTEM SYSTEM RESET
TEST CLR SETUP
MSG returns the active
warnings to the message
field.
STANDBY RANGE=50.0 PPB CO=XX.XX
TEST CAL MSG SETUP
Figure 12-1: Viewing and Clearing Warning Messages
06864B DCN6314