Teledyne T101, Operation Manual, Page: 64 / 375

Operating Instructions Teledyne ML – T101 Operation Manual
60
TEMP Converter
Temperature
H
2
S present in the sample gas into SO
2
.
TEST
2
Test Signal
2
mV
Signal of a user-defined test function on output channel A4.
TIME Clock Time hh:mm:ss
The current day time for DAS records and calibration events.
1
Shown as they appear when analyzer is in H
2
S mode. In SO
2
mode appear as SO2 STB, SO2 OFFS & SO2 SLOPE.
In multigas mode, both versions appear.
To view the TEST Functions press the following touchscreen control button sequence:
1
Only appears if IZS option is
installed.
2
Only appears if analog output A4
is actively reporting a test function.
3
Shown as they appear when analyzer
is in H
2
S mode. In SO
2
mode appear as SO2 STB , SO2 OFFS &
SO2 SLOPE . In multigas mode, both versions appear.
RANGE
H2S STB 3
SAMP FL
PRES
PMT
NORM PMT
UV LAMP
LAMP RATIO
STR. LGT
DARK PMT
DARK LAMP
H2S SLOPE
3
H2S OFFS
3
HVPS
RCELL TEMP
BOX TEMP
PMT TEMP
CONV TEMP
IZS TEMP
1
TEST
2
TIME
SAMPLE RANGE = 500.0 PPB SO2 400 PPB
< TST TST > CAL SETUP
Toggle <TST TST> buttons
to scroll through list of
Figure 4-1. Viewing T101 TEST Functions
NOTE
A value of “XXXX” displayed for any of the TEST functions indicates an out-of-range reading or the
analyzer’s inability to calculate it.
All pressure measurements are represented in terms of absolute pressure. Absolute, atmospheric
pressure is 29.92 in-Hg-A at sea level. It decreases about 1 in-Hg per 300 m gain in altitude. A variety of
factors such as air conditioning and passing storms can cause changes in the absolute atmospheric
pressure.