Teledyne T100, Instruction Manual, Page: 88 / 404

Operating Instructions Teledyne ML - T100 UV Fluorescence SO2 Analyzer
88
4.5. SETUP
– CFG: VIEWING THE ANALYZER’S CONFIGURATION
INFORMATION
Pressing the CFG button displays the instrument configuration information. This display
lists the analyzer model, serial number, firmware revision, software library revision,
CPU type and other information. Use this information to identify the software and
hardware when contacting customer service. Special instrument or software features or
installed options may also be listed here.
SAMPLE RANGE = 500.000 PPB SO2 =XXX.X
< TST TST > CAL SETUP
SAMPLE ENTER SETUP PASS : 818
8 1 8 ENTR EXIT
SAMPLE
PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE EXIT
SAMPLE T100 SO2 ANALYZER
NEXT PREV EXIT
Press EXIT at
any time to
return to
SETUP menu
Press EXIT at
any time to
return to the
SAMPLE display
Press NEXT of PREV to move back
and forth through the following list
of Configuration information:
 MODEL NAME
 SERIAL NUMBER
 SOFTWARE REVISION
 LIBRARY REVISION
 iCHIP SOFTWARE REVISION 1
 HESSEN PROTOCOL REVISION 1

ACTIVE SPECIAL SOFTWARE
OPTIONS
1
 CPU TYPE
 DATE FACTORY CONFIGURATION
SAVED
1
Only appears if relevant option of Feature is active.
Figure 4-6: SETUP
– Configuration Information