9-1
EAR99 Technology Subject to Restrictions Contained on the Cover Page
SyriXus Series Pumps Installation and Operation Guide
Section 9 Pump Maintenance, Troubleshooting, and Servicing
9.1 Replacement
Parts
Replacement parts are available for some of the SyriXus series pump
models (excluding models that are certified). Most components for the
HLf (Hazardous Location) pump models, for example, are not
available for end user repairs to comply with their certification
requirements. These units would need to be returned to the factory for
repair.
Replacement Parts Lists are available at
These lists will identify the part numbers for replacement components
available for customer repairs. Some commonly replaced parts can be
ordered directly from our online store. Other components will require
calling our customer service department to assist in selecting the right
parts and guidance on installation.
NOTE
For replacement part numbers and parts ordering, use the Teledyne
ISCO
located at
https://store.teledyneisco.com/
.
RISK OF ELECTRIC SHOCK - DISCONNECT THE ELEC-
TRIC POWER BEFORE SERVICING. ONLY TRAINED SER-
VICE PERSONNEL MAY REMOVE THE CASE TOP.
RISQUE DE CHOC ÉLECTRIQUE. COUPER L´ALIMENTA-
TION AVANT LA RÉPARATION. L´USAGER NE DOIT PAS
DÉMONTER L´INSTRUMENT OU DÉRANGER LE
MÉCANISME DEDANS. ADRESSER LA REPARATION
SEULEMENT AUX TECHNICIENS COMPÉTENTS.
Electrical Hazard! Earth ground bonding
conductor. Do not remove or disconnect.
Mise à la terre. Ne pas enlever ni décon-
necter.
