Teledyne Sierra M6-2 User Manual Download Page 66

Page: 66 / 538

Teledyne LeCroy

Projects

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

*.wst

SATA Workspace file (in the SATA System folder “PreDefined\Workspace”
subfolder)

2.6.2

Example Projects

The Analyzer includes example projects that you can use to perform an immediate
analysis without any setup.

The Analyzer system software has a pre

‐

defined folder (directory) structure for storing all

files. All example files are in the Examples folder under the Sierra M6

‐

2 folder.

It is strongly recommended that you open some example files to see types of projects
that you can create.

2.6.3

Run an Example Analysis Project

To run an example project:

1. Select

File

Open

2. Locate example analysis projects by looking in the Examples folder. Examples are

available for AdvanceCaptr, EasyCaptr, Exerciser, PatternGenerator, Samples,
Target Emulator, and User Define Decoding Script.

3. In the EasyCaptr folder, choose an example

*.sac

file and click

Open

to display the

example project dialog.

Figure 2.39: File Open Dialog

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for Sierra M6-2

Reviews:

Teledyne Sierra M6-2, User Manual, Page: 66 / 538

Search results

Summary of Contents for Sierra M6-2

Reviews: