Teledyne Sierra M6-2, User Manual, Page: 65 / 538

Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual 63
Projects Teledyne LeCroy
2.6 Projects
You can define a new project, starting with the default project definition, or modify the
settings for the last project run.
New Default Project
To start a New project, select File > New on the main menu bar and choose
Protocol Analyzer to open a new project with default settings that you can modify (see
“Main Window” on page 49 ).
Last Project
Clicking the Green button opens the last project run, so you can modify it.
2.6.1 Project File Types
Projects have the following file types:
*.asl Decoding script file (in the Examples folder “User Define Decoding Script”
subfolder)
*.cfg Display Configuration file (in the System folder “Config” subfolder)
*.dat DataBlock file (in the System folder “DataBlock” subfolder)
*.sac SAS Protocol Analyzer/Capture Project/Viewer file (in the Examples folder
“EasyCaptr”, “AdvanceCaptr”, or “Exerciser” subfolders)
*.saf Device Identifier file
*.scs SAS Sample file (in the SAS Examples folder “Sample” subfolder)
*.sde Device Emulator file (in the System folder “Compliance” subfolder)
*.sfl Filter configuration file
*.spg Single ‐ role Pattern Generator file (in the Examples folder
SAS “PatternGenerator\Single role (spg files)” subfolder and
SATA “PatternGenerator\Single Role” subfolder). Single role means the file is
for a Device or Host.
*.ssh SAS Search configuration File
*.stc SATA Protocol Analyzer/Capture Project/Viewer file (in the Examples folder
“EasyCaptr”, “AdvanceCaptr”, or “Exerciser” subfolders)
*.std Target Emulator file (in the Examples folder “Target Emulator” subfolder)
*.sts SATA Sample file (in the SATA Examples folder “Sample” subfolder)
*.tsh SATA Search configuration file
*.wss SAS Workspace file (in the SAS System folder “Predefined\Workspace”
subfolder)