Teledyne Sierra M6-2, User Manual, Page: 64 / 538

Teledyne LeCroy Start Recording
62 Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual
Figure 2.38: Export Paired SAS Address Report Dialog.

Check the box Export the whole payload (more than 32KB) to export the whole
payload (more than 32KB).

You can limit the data range of the saved file. You can save:

All Packets

Range between selected cursors
You can view expanded traffic (particularly during discovery) in a spreadsheet format. You
can use column headers with SAS Address Pairs. For example, instead of I1, T1, I2, T2, and
so on, the columns are Source/Destination SAS Address pairs, such as S1:SEP or S2:EXP 0.
2.5.8 Trace Properties
Select File > Trace Properties to see the properties of the trace. For more information refer
to “Trace Properties” on page 223 .
2.5.9 Edit Comment
You can write comments and edit them for a trace for future use. Select File > Edit Comment
to view the edit window. Key in the comments and close the window.