manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 446 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 446

Teledyne LeCroy

Creating a Traffic Generation File

444

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

In the screenshot, global settings make up the eight bars at the top of the window. Below 
that are five frames. If you look at the script itself, there are six frame commands, five 
active and one commented out.

The following sections describe how to open and edit traffic generation files.

5.5.3

Converting an SATrainer Traffic Generation File

If you have old 2500

‐

based SATrainer Generator 

.stg

files (previously used with CATC 

Tracer/Exerciser Model120K), you can convert them to Sierra Trainer Traffic Generator 

.ssg

 files using the legacy 

Convert

 function.

Perform the following steps to convert an 

.stg

 file into an .

ssg

 file: 

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments