Teledyne Sierra M6-2, User Manual, Page: 443 / 538

Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual 441
Setting Up for Generating Initiator Traffic Teledyne LeCroy
The buttons have the following functions:
5.3 Setting Up for Generating Initiator Traffic
Connect the SAS cable from the Target port of the Sierra Analyzer to the Target port on
the unit under test. This transmits the Traffic Generator stream from the Target port to
the target ‐ side port on the unit under test.
Open Document.
Save As. Opens a dialog in
which you can save your edits
in the appropriate file type.
Edit as Text. Edit the text file for
the document. Setup Display Options. Opens
the Display Options window.
Zoom In. Zoom Out.
Wrap. Find.
Find Next. Start All Generation.
Stop All Generation. Resume All Generation.
Connect All Link. Disconnect All Link.
Setup Generation Options.
Opens the Generation Options
window. Launch Jammer (Infusion).
Launch Analyzer. Start Recording.
Stop Recording. Abort Recording.
Show Port Configuration Dialog.
(See
“Ports Configuration” on
page 112 .)
Show Script Assignment
Dialog.
(See section below.)
Tile Windows
Assign Active Script/
Remove Assigned
Script for
Link 1, 2, 3, or 4
See
“Multi ‐ Port Trainer Script
Assignments to Links” on
page 455
.