manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 438 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 438

Teledyne LeCroy

Sierra Trainer Menus

436

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

5.1 

Sierra Trainer Menus

The Sierra Trainer menus are: 

5.1.1

File Menu

New

 

GenFile

: Starts a new Generation File.

Open:

 Opens a file.

Close:

 

Closes the current window.

Launch

 

Analyzer:

 Displays Analyzer Window.

Launch

 

Jammer:

 Displays Jammer (Infusion) Window.

Save

 

As:

 

Saves the current file with a new name.

Print:

 Prints part or all of the current traffic data file.

Print

 

Preview:

Produces an on

‐

screen preview before printing.

Print

 

Setup:

 

Sets the options for the current or new printer.

Edit

 

Comment

: Allows you to enter a comment in a dialog.

Export

: Saves trace as text file in Packet View Format.

Convert

: Converts an SATrainer Generation File (

.stg

 file) to a Generation File (

.ssg

file).

Figure 5.2: Trainer File Menu.

5.1.2

Setup Menu

Update Sierra Device: See 

“Update Device” on page 337

.

Port

 

Configuration

: 

You can select different combinations of Trainer with Analyzer and Jammer. When 
running two different applications on the ports, you must set the same port 

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments