manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 369 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 369

 

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

367

Chapter 4

InFusion Overview

The Teledyne LeCroy InFusion™ Error Injector and Traffic Modifier is an error injector and 
traffic modification tool that allows you to verify real

‐

world fault handling for 

Serial Attached SCSI (SAS) and Serial ATA (SATA) systems. InFusion can sit unobtrusively in 
the data path on a live system to programmatically alter or corrupt traffic. InFusion is the 
ideal tool for stress

‐

testing systems using actual workloads.

Figure 4.1: InFusion Windows.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments