manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 354 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 354

Teledyne LeCroy

Power Source Control

352

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

Aliasing

You can enter a 16

‐

character alias name for a device. In the Device List, right

‐

click the 

device name and enter an alias after the colon.

The alias name appears in the Device List. 

Exporting

You can export a device specification to a text file. Click the 

Export

 

button to open the 

Export dialog. 

3.26  Power Source Control

This function allows you to manage power for connected devices.

Select 

Setup

 on the main menu bar and choose 

Power

 

Source

 

Control

.

Figure 3.168: Power Source Control

The Power Source Control dialog displays (see 

Figure 3.169 on page 353

).

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments