manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 342 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 342

Teledyne LeCroy

Help Menu

340

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

Figure 3.154: Choosing a Script File

3.23 Help 

Menu

3.23.1 Tell Teledyne LeCroy

Report a problem to Teledyne LeCroy Support via e

‐

mail. This requires that an e

‐

mail 

client be installed and configured on the host machine.

3.23.2 Help Topics

Displays online help. You can also select F1.

3.23.3 VSE Help Topics

Displays VSE online help. You can also select F1. 

3.23.4 Update License

A current license agreement with Teledyne LeCroy entitles the Analyzer owner to 
continued technical support and access to software updates as they are published on the 
Teledyne LeCroy website. When you obtain a license key, from the Help menu select 
Update License to display the Select License Key File dialog box. Enter the path and 
filename for the license key, or browse to the directory that contains the license key and 
select the *.lic file. Click Open.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments