Teledyne Sierra M6-2, User Manual, Page: 301 / 538

Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual 299
Navi View Toolbar Teledyne LeCroy
Figure 3.107: Search Parameter Definition Dialog
You can continue to search the output file using Next Search (F3) or Previous Search (F4)
for the same pattern, until you redefine the data capture search parameters.
Save Search Setup
After you have set up a Search configuration, you can save it as a SAS Search configuration
file (
*.ssh ) or a SATA Search configuration file ( *.tsh ) by clicking Save . You can then use it
on a different capture by clicking Load in the Search dialog.
Search By
Choose Hashed SAS Address to search on hash address, or choose SAS Address to search
for address.
Search Direction
Choose either Forward or Backward direction in which to perform the search.
Search From
Choose a starting point to begin or continue a search: Start of the sample file,
Trigger Pointer, X Pointer, Y Pointer, or Last Found.