Teledyne Sierra M6-2, User Manual, Page: 258 / 538

Teledyne LeCroy Analysis
256 Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual

Cmd Minimum Read (MB/S)

Cmd Average Read (MB/S)

Cmd Maximum Read (MB/S)

Total Write Cmd

Total Write (Bytes)

Total Write Duration is the sum of all write commands duration.

Cmd Minimum Write (MB/S)

Cmd Average Write (MB/S) is the Total Write (Total payload size of all write com ‐
mands in sample file in MB) / Total Completion Time (Total completion time of
all write commands in sample file in seconds).

Cmd Maximum Write (MB/S)

Average Byte per SSP Frame

Average Byte per STP Frame
Figure 3.55: SAS: Performance Report
Performance Report (SATA)
To display the Performance Report, click the Performance tab. The Performance Report
displays information in the following columns (see Figure 3.56 on page 257 ):

Minimum Completion Time

Average Completion Time

Maximum Completion Time

Host Bus Utilization

Device Bus Utilization

Efficiency (%)

Total Read Cmd

Total Read (Bytes)

Total Read Duration

Cmd Minimum Read (MB/S)

Cmd Average Read (MB/S)

Cmd Maximum Read (MB/S)

Total Write Cmd

Total Write (Bytes)

Total Write Duration is the sum of all write commands duration.

Cmd Minimum Write (MB/S)

Cmd Average Write (MB/S) is the Total Write (Total payload size of all write com ‐
mands in sample file in MB) / Total Completion Time (Total completion time of
all write commands in sample file in seconds).

Cmd Maximum Write (MB/S)

Average Byte Per FIS

FIS Minimum Difference Time

FIS Average Difference Time is the difference between two back to back FIS in
the same link and is the average.