Teledyne Sierra M6-2, User Manual, Page: 250 / 538

Teledyne LeCroy Analysis
248 Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual
Note:
Results are displayed only for items that have been captured in the sample.
Report Options
Some report categories offer options to display only specific items.These report
categories incorporate drop
‐ down list boxes offering pre ‐ defined and custom options. For
details see “Formatting the Statistical Report View” on page 262 .
General Report
To display the General Report, click the General tab. The General Report displays the
report data in columns with the following information. See the following screen capture:

Type: All, Custom, Bus Condition, FIS, Identify Address Frame,
Open Address Frame, SMP Frame, SSP Frame, STP Frame

Direction : All, H ‐ >D, D ‐ >H, I ‐ >T, T ‐ >I, or Custom

Duration : All, Custom, or time unit

Count : All, Custom, or a number of occurrences

% : of total count
Figure 3.39: General Statistical Report
Primitive Report
To display the Primitive Report, click the Primitive tab. The Primitive Report displays
information in the following columns:

Primitive : All, Custom, Unknown
For SATA: CONT, EOF, HOLD, HOLDA, R_IP, R_OK, R_RDY, SOF, SYNC, WTRM,
X_RDY, ALIGN
FOR SAS: SATA_CONT, SATA_EOF, SATA_R_IP, SATA_R_OK, SATA_R_RDY, SATA_
‐
SOF, SATA_SYNC, SATA_WTRM, SATA_X_RDY, ACK, EOF, SOF, EOAF, SOAF,
AIP_WAITING_ON_DEVICE,AIP_NORMAL, DONE_NORMAL, READY_NORMAL,
CLOSE_NORMAL, OPEN_ACCEPT, ALIGN0, ALIGN1, NOTIFY_ENABLE_SPINUP

Direction : All, H ‐ >D, D ‐ >H, I ‐ >T, T ‐ >I, or Custom

Count : All, Custom, or a number of occurrences

% : of total count