manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 238 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 238

Teledyne LeCroy

Analysis

236

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

Figure 3.22: Goto Response Trace

3.3.4

Changing the Default View

Perform the following steps to change the default view of all trace files to Packet View: 

1. Open a trace file.
2. Select the 

Packet

 

View

. Close all other views.

3. Select 

File

 

>

 

Save

 

Workspace

 to open a Save As dialog. Save the current workspace 

as a 

.wss

 file.

4. Select 

Setup

 

>

 

Preferences

 

and select the Trace Viewer tab.

5. In the Default Workspace field, enter the path and name of the workspace 

.wss

file 

that you saved in step 3.

Because the default workspace contains only Packet View, the software opens trace files 
in Packet View.

3.3.5

Spreadsheet View

Spreadsheet View displays all of the Packet View fields in a time sequential spreadsheet 
format. To display the Spreadsheet View of the current capture, click 

Analysis > Spreadsheet View

 or click the 

 button on the toolbar.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments