manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 231 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 231

 

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

229

Analysis

 Teledyne LeCroy

1. Right

‐

click on any command field in the trace. Select "Color of ..." option to set the 

color for the selected operation code field.

2. In the Preferences window, select the Packet View tab. select the "Based on Specific 

Command Type" option. In the commands list, search for any command that you 
want, and change the background and foreground colors.

Packet View Metrics

The Metrics feature provides quick access to additional information about the packet 
data. Click the M icon as shown in Figure 3.9 to display the details.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments