Teledyne Sierra M6-2, User Manual, Page: 213 / 538

Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual 211
Target and Device Emulation Teledyne LeCroy
Power Management Setting
Use the Power Management tab to manage power settings . Enter the relevant information in
the Host Initiated Power Management and Device Initiated Power Management panes.
Figure 2.223: Power Management Tab
2.12.12 Notes Tab
Click the Notes tab and enter a Project Name and a brief description of the
Target Emulation project (see “Add a Project Note” on page 116 ).
2.12.13 Run Target Emulation
Click the Start Target Emulator button or select Session > Start Target Emulator
to start emulation.
Note:
You can run the analyzer while device emulation is active to monitor bus traffic.
2.12.14 Device Emulator Settings (SATA only)
Click the Settings tab to display the Device Emulator Settings dialog.
The Settings tab opens with a default set of values, which you can modify. To return to
these values, click the
Default Settings button.