Teledyne Sierra M6-2, User Manual, Page: 176 / 538

Teledyne LeCroy Emulation
174 Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual
2. Choose the number of data columns (up to 16 data cells/row) and the cell length
(up to 16 bytes/cell). This is a display function only.
3. Click either the Bin, Hex , or Ascii option button to choose a number format.
4. Click either the LSB or MSB option button to choose a bit order.
Naming a Data Block
Each new data block automatically receives a sequential data block number. To assign a
unique descriptive name to a data block, right
‐ click the data block name to open the Data
Block Edit menu.
Figure 2.187: Data Block Edit
Choose Rename.
Figure 2.188: Rename Data Block
Enter a descriptive name in the New Name edit box and click OK.
Editing a Data Block
You can enter data in the defined cell structure by these methods:

Define your own pattern

Set a counter

Choose a Random Pattern

Choose a Walking Bit Pattern
Define Your Own Pattern
To define a pattern:
1. Click Pattern to open the Define Pattern dialog box (see Figure 2.189 on page 175 ).
2. Enter a data pattern in the Data Pattern edit box.
3. Choose the number of times to repeat that pattern, and click
OK.