Teledyne Sierra M6-2, User Manual, Page: 169 / 538

Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual 167
Emulation Teledyne LeCroy
Figure 2.178: SATA: Host Setting Tab
Choose Host Emulator Port
For each port, select a speed.
Pattern Generator
You can select a Pattern Generation file. To perform a capture with a Pattern Generator,
enter a path to a pattern generator
*.spg file in the File Name dialog. See “Creating a
Pattern Generator File” on page 509 for instructions how to create a Pattern Generator
file.
Host Emulator
You can run an Host Emulator while setting:

Auto stop Exerciser when Analyzer stops

Auto stop Analyzer when Exerciser stopped

CONT usage

Auto update “Sector Count” before running

Delay between getting HOLD to Sending HOLDA

Data Frame Payload Size

ATA Command Execution Timeout

Logical Block Size (for ATAPI)
Check Autostop exerciser when Analyzer Stopped to halt the Host Emulator when the
Analyzer stops.