50
Operation
SeaBat UI - User Manual
4.10.5 Five Points Environment
Figure 4-71
Five points environment settings
When the pipe is detected 5 point on and around the pipe will be
computed and outputted to generate a basic profile of the seafloor with
the pipe.
The five points are the top of pipe, the seafloor on both sides of the pipe
(as close as possible to the pipe) and the seafloor on both sides further
away from the pipe (maximum sample offset).
Environment sample width
A window over the multibeam data in which an average is computed
for the seafloor detections.
Maximum sample offset
The distance from the top of pipe to the seafloor detection away from
the pipe.
4.11 Screens
In the Operation mode four different screens can be displayed. Two
screens display the bathymetry data as a wegde and water column or
detection screen. One screen is for the sidescan data or Helsman. And
one screen is for the snippets data. In this chapter the four different
screens will be discussed.
