Teledyne SeaBat UI User Manual Download

Page: 18 / 78



General Information

SeaBat UI - User Manual

3.2.1.4 Context Menu

The different modes for the panes can also be set with the context menu.
When a pane is open, click with the right mouse button in the
pane/window and a context menu will be opened.

Figure 3-5

Context menus of the pane with in each menu a different mode

selected

The first picture is the context menu when the pane is in the Auto Hide
mode. Uncheck

Auto Hide

and the pane will come in the Docking mode.

The second picture is the context menu when the pane is in the Docking
mode. Check

Auto Hide

Floating

to go to another mode.

The third picture is the context menu when the window is in the Floating
mode. Check

Docking

to change the mode to the Docking mode. It is not

possible to go from Floating direct to Auto Hide mode.

3.3 SeaBat UI Toolbar

Figure 3-6

Toolbar of the SeaBat UI

The SeaBat UI has on top a toolbar with several options. The items in the
toolbar will be discussed from right to left.

3.3.1 Application Settings Dialog

Click on

to open the application settings dialog.

Figure 3-7

Application settings dialog

Summary of Contents for SeaBat UI















































































Search results

Summary of Contents for SeaBat UI

Reviews:

Related manuals for SeaBat UI

Brands by name

Popular brands

Teledyne SeaBat UI, User Manual

Search results

Summary of Contents for SeaBat UI

Reviews:

Related manuals for SeaBat UI

Brands by name

Popular brands