Teledyne SeaBat T Series, Operator'S Manual, Page: 90 / 152

TROUBLESHOOTING
SeaBat T-Series Subsea Operator's Manual Page 78 January 31, 2019
Version 7
Message Description Action
Failed to set up DMA Card 0,
ERROR =
Failed to allocate memory for
ADMXRC transfer.
Failed to set ADMXRC clock,
Card_1, ERROR =
Failed to get ADMXRC space info,
Card_1, ERROR =
Failed to configure 1st FPGA with
<x>, ERROR =
Failed to find ADMXRC info,
card_0, ERROR =
Failed to set ADMXRC clock,
Card_0, ERROR =
Failed to get ADMXRC space info,
Card_0, ERROR =
Failed to find ADMXRC info,
card_1, ERROR =
A.2.3 Data Reading Errors
Message Description Action
DMA Transfer Timeout. <x> of <x>
bytes received This error generally indicates
that the uplink from the
receiver is interrupted at
some point. Check the BITE tab for
receiver BITE values to
try and localize the
failure to a component.
Check uplink cable
connections. Check
temperature of the SSP
via BITE. Restore
factory defaults. Reboot
the PC.
FATAL: DMA Read size limitation
reached.
Lost sync with DMA read
A general error occurred
while transferring data to the
software. Reboot the system.
A.2.4 System Resource Errors
Message Description Action
Error starting <name> thread. A module has failed to start
correctly. Reboot the system.