Teledyne Princeton Instruments PI-MAX 3, System Manual

Page: 40 / 250

40 PI-MAX
®
3 System Manual Issue 2
5.2 Examine Equipment and Verify Parts Inventory
Verify that all equipment and parts necessary to set up the PI-MAX3 have been received.
A typical system consists of:
• PI-MAX3 camera (Gen II or Filmless Gen III);
• PI-MAX3 power supply;
• Timing Generator;
Integrated into the PI-MAX3
• Accessory Kit
Includes:
— Light Table Mount Extender;
— AUX I/O Cable;
— PVC tubing;
— Double-ended Screwdriver with Magnetic top;
— Two Adapter Mounts;
C mount, F-mount, and spectroscopy mounts are supplied, one of which
has been factory installed).
• GigE Computer Interface
• Host Computer (customer supplied);
• WinView/32, WinSpec/32, or LightField CD-ROM;
• User Manuals;
• Interface Dependent Components:
— Computer Interface GigE cable
Standard Ethernet Cable, 5 m (P/N: 6050-0621).
Additional lengths up to 100 m are available.
— Interface Card
User-provided GigE interface card. (Intel Pro1000 recommended).
• System Dependent Components:
— CoolCUBE
II
Coolant Circulator;
— Coolant Tubing.
If there are any problems, contact the Teledyne Princeton Instruments Customer
Support. Refer to
Contact Information on page 248 for complete information.