Chapter 1
About this Document
11
EAR99
Technology
Subject
to
Restrictions
Contained
on
the
Cover
Page.
1.6
Precautions
To prevent permanently damaging the Lansis system, observe the following
precautions at all times.
CAUTION!
!
1. The CCD array is very sensitive to static electricity.
Touching the CCD can destroy it. Operations requiring
contact with the device can only be performed at the
factory.
2. When using high-voltage equipment (e.g., an arc lamp,)
with the camera system, be sure to turn the camera power
ON LAST and turn the camera power OFF FIRST.
3. Use caution when triggering high-current switching
devices near the system (e.g., an arc lamp.) The CCD can
be permanently damaged by transient voltage spikes. If
electrically noisy devices are present, an isolated,
conditioned power line or dedicated isolation transformer
is highly recommended.
4. Do not block air vents on the camera. Preventing the free
flow of air overheats the camera and may damage it.
5. If the Lansis camera system is used in a manner not
specified by Teledyne Princeton Instruments, the
protection provided by the equipment may be impaired.
