manualshive.com logo in svg

Teledyne Princeton Instruments FER785-MM, User Manual, Page: 2 / 28

Share
Download
Teledyne Princeton Instruments FER785-MM User Manual Download Page 2

All rights reserved. No part of this publication may be reproduced by any means without the written permission of Teledyne Princeton 
Instruments.
Printed in the United States of America.
Pentium is a registered trademark of Intel Corporation.
Scientific Imaging ToolKit and SITK are trademarks of R Cubed Software Consultants, LLC.
PVCAM, IntelliCal, IsoPlane, LightField, and PI-MAX are registered trademarks of Teledyne Digital Imaging US, Inc..
Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries. 
The information in this publication is believed to be accurate as of the publication release date. However, Teledyne Princeton 
Instruments does not assume any responsibility for any consequences including any damages resulting from the use thereof. The 
information contained herein is subject to change without notice. Revision of this publication may be issued to incorporate such 
change.

Copyright 2017-2019

All Rights Reserved

Teledyne Princeton Instruments
3660 Quakerbridge Rd
Trenton, NJ  08619
TEL: 800-874-9789 / 609-587-9797
FAX: 609-587-1970

2

FER785-MM Diode Laser Source User Manual

Issue 2

Revision History

Issue

Date

List of Changes

Issue 2

March 29, 2019

Issue 2 of this document incorporates the following changes:

• Rebranded to Teledyne Princeton Instruments.

Issue 1

April 5, 2017

This is the initial release of this document.

Summary of Contents for Princeton Instruments FER785-MM





























Reviews:

No comments