Teledyne Kibra DDR, User Manual, Page: 68 / 174

Teledyne LeCroy Recording Options Setup
66 Kibra DDR Protocol Analyzer User Manual
Figure 2.35: Clock Present
Note:
The software tries to make "reasonable" assumptions about certain trigger types. For example,
if the user changes the CMD group and all chip select signals are "Don't care", the chip ‐ select
group is changed to "Any" automatically. Also, If the user changes one chip ‐ select from "any" to
something else, all other chip ‐ select signals change to 1.
2.6.4 Recording Options - Memory Address Mapping Tab
In the Recording Options Dialog you can set the user defined Address Mapping options in
the Memory Address Mapping tab (see Figure 2.36 on page 67 ). You can choose from:

Use External plugin ‐ This is not supported in release 2.30. It will be implemented
in a future release.

Define system address mapping
The Memory Mapping tab allows the user to define how their system memory maps to
the physical memory of the DIMM. This dialogue allows you to customize the system
address by dragging and dropping Ranks/Bank, Row and Column addresses. Additionally,
two popular predefined memory maps are available
You can customize the System Address by either dragging and dropping Rank/Bank, Row
and Column addresses or by selecting patterns. In the Drag/Drop approach, the user can
select cells from Rank/Bank, Row and Column cells individually or a range by keeping the