HDO9000 High Definition Oscilloscopes Operator's Manual
Save / Recall
The oscilloscope is capable of saving panel setups, waveform data, table data (such as
measurements), screen prints, and LabNotebooks in several formats and to recall them to the
display. The File menu functions enable you to set the defaults used for these features as well as to
manually launch each.
Save Setups
Save Setups allows you to quickly save up-to-six panel settings to internal storage, while Recall
Setups restores them with a touch. Setups are saved to the D:\Internal Setups folder.
If desired, you can also save panel settings as an .lss file in a different location, such as a USB drive,
and recall them from the same.
Choose
File > Save Setup...
from the menu bar or click the
Save Instrument Setup
button on the main
Save/Recall dialog.
Save Setup to Memory
1. Touch one of the
Setup
data entry controls and enter a name for the memory.
2. Touch the corresponding
Save
button directly to the left of the Setup field.
The save date/time is displayed above the
Setup
data entry control.
Save Setup to File
1. In
Save Panel to File
, touch
Browse
and navigate to the desired folder.
Tip:
If the instrument is networked, you can touch Save Panel to File and enter the full
Windows network address of another location in which to save the file. The instrument
must have access to this directory.
2. Enter a
File name
, or choose a existing file to overwrite. Touch
OK
.
3. On the Save Setups dialog, touch
Save Now!
142
