Teledyne Genie Monochrome Series M1280, User Manual

Page: 43 / 279

Nano Series GigE Vision Camera Genie Nano Specifications
•
41
SNR (dB) 33.01 39.38 dB (in 8-Bit Pixel Format)
* Limited to the Genie Nano Architecture:
~250MB/sec Sustained into the TurboDrive Engine achieved using 1500 Byte Packet Size
Firmware Files for Model M4060
The latest firmware files for all Nano models are available on the Teledyne DALSA support web site:
http://www.teledynedalsa.com/imaging/support/downloads/firmware/
The firmware files for this model are listed below. The xx denotes the current build number.
M4060
•
Standard
“Genie_Nano_Sony_IMX25x_3.2M-5.1M-9M-12M _Mono_STD_Firmware_7CA18.xx.cbf”
• High Sensitivity
“Genie_Nano_Sony_IMX25x_3.2M-5.1M-9M-12M_Mono_HSD_Firmware_7CA18.xx.cbf”
Specifications: C4060
Supported Features C4060
Resolution 4112 x 2176
Sensor Sony IMX255 (8.9M)
Pixel Size 3.45 µm x 3.45 µm
Shutter type Full frame electronic global shutter function
Firmware option
(Field programmable)
High Sensitivity
Design (Bayer)
Standard Design
(Bayer)
RGB-Output
Design
Full Well charge; dependent on
Firmware Design Loaded
2750e- (max) 11ke (max)
Sensitivity to Saturation 4x 1x
Max. Internal Frame Rate
Full resolution
56 fps 46 fps
Maximum Sustained Frame Rate
Output ( with TurboDrive v1 )*
28 fps (8-bit) N/A
Maximum Sustained Frame Rate
Output ( without TurboDrive )
13 fps (8-bit)
3.2fps (RGBA)
4.3 fps (RGB)
6.5 fps (Yuv422)
13 fps (mono8)
Pixel Data Formats Bayer 8-Bit Bayer 8-Bit
RGBA 32-bit
RGB 24-bit
Yuv422 16-bit
Mono 8-bit
Trigger to Exposure Minimum delay
(Synchronous Exposure Alignment)
2 line time (15.8µs) 2 line time (19.5µs)
Trigger to Exposure Minimum delay
(Reset Exposure Alignment)
0 µs
Trigger to Exposure Start jitter (best
case with Synchronous Exposure
Alignment)
Max 1 line
0 to 7.89µs
Max 1 line
0 to 9.72µs
Trigger to Exposure Start jitter
(Reset Exposure Alignment)
0 µs