FIRE
R M LD
FIRE
R M LD
Operator’s Manual
22
GAS LASER
Doc No. 16162 Rev A, GAS LASER Operator Manual
© 2021 Teledyne Gas Measurement Instruments Ltd. All rights reserved.
To access recorded/captured data:
1. Turn on instrument.
2. Use the provided USB 2.0 A
to Micro-B cable to connect the
instrument to the PC.
a.
Plug the Micro-B end into the
port on the instrument while
powered on.
b.
Plug the USB 2.0 A end into
the USB port of the PC.
3. A file explorer window should
open automatically when the
device is ready for access, or
simply browse the PC’s devices
and drives to locate the instru-
ment’s USB drive.
USB File Transfer
Root
Folder
Daily
Folders
Captures
Folder
Diagnostics
Folder
Datalogs
Folder
Capture
Image
.bmp
Startup
Log File
.txt
Capture
Log File
.txt
Fault
Log File
.txt
Peaks
Folder
SELF_TEST
Folder
Data Log
File
.txt
Peak Log
File
.txt
Basic folder
and file structure:
File Access
The Gas Laser stores data on an internal SD memory card. The data files can be
downloaded or accessed in the following ways:
- USB File Transfer
(details below)
- WiFi connection to Configuration Portal
Plug the Micro-B end into the
instrument while powered on.
a.
b.
Plug the USB end into the
USB port of the PC.
File Name Conventions
<
SERIAL
>
-
<
DATE
>
-
<
TIME
>
-
<
USERNAME
>
-
<
FILETYPE
>
.
<
EXT
>
SERIAL
number of instrument
DATE
of file creation (YYMMDD)
TIME
of file creation (HHMMSS)
USERNAME
of user that was
logged on (always ADMIN for FR)
FILETYPE
is the file type name:
Capture(Log)
Selftest
Datalog
Peaks
Startup
Fault
EXT
is the file extension
.bmp
for Capture images
.txt
for log files
NOTICE
NOTICE: Recognition of Gas Laser may take some time on first plug in as
the required drivers are installed. Please allow time for this initial process
to complete.
SELF_TEST
Log File
.txt